These are strictly for the advanced cue builder or anyone wishing to elevate their cue building. These fronts produce incredible hitting cues.These are strictly limited and may be withdrawn without notice. They are made from whatever flavor wood you choose (over 20). Then, we bore out a perfect .750 hole through the entire 13" piece. We then cut our maple coring dowels down to .750 X 15" and slide the maple core inside the bored front for a nice tight fit. Once this is achieved, we then glue the two together (there is a little more involved than this but for practicality this is it in a nutshell). When the glue is dried, we put a taper on the front of approximately .925/1.150". Each end has a 60 degree center and treated with Resolute. These are incredibly stable and ready for immediate use. These are available immediately. They are also treated in Resolute. We recommend that you wait at least a week prior to performing any work on these. The first thing that you should do it take a very small pass on your equipment. You may also cut points in or whatever you can dream up. ;-) You can purchase wood for points and custom veneers to build your own custom forearms. Considering how well these are crafted and how consistent they are from front to front -- the cost of wood, cost of machinery, tooling and labour, our price is quite reasonable. |