The picture shown here is currently the quality of what you can expect to receive. Nice huh! These are strictly for the advanced cue builder or anyone wishing to elevate their cue building. These fronts produce incredible hitting cues.These are strictly limited and may be withdrawn without notice. With modern coring it is now possible to use Madrone Burl and we are proud to be able to offer it out to our friends and customers. These are made from beautiful Madrone Burl. Then, we bore out a perfect .750 diameter hole through the entire 13" piece. We then cut our straight grained maple dowles down to .750 X 15" and slide the maple core inside the bored front for a nice tight fit. Once this is achieved, we then glue the two together. When the glue is dried, we put a taper on the front of approximately .925/1.150". Each end has a 60 degree center and all pieces are treated with Resolute. These are incredibly stable and ready for almost immediate use. We recommend letting them sit in your shop for a couple of weeks prior to taking a pass. These are available immediately. They are also treated in Resolute. We recommend that you wait at least a week prior to performing any work on these. The first thing that you should do it take a very small pass on your equipment. You may also cut points in or whatever you can dream up. ;-) You can purchase wood for points and custom veneers to build your own custom forearms. Considering how well these are crafted and how consistent they are from front to front -- the cost of wood, cost of machinery, tooling and labour, our price is quite reasonable. |