  These are made from beautiful Cocobolo. Then, we bore out a perfect .750 diameter hole through the entire 13" piece. We then cut our maple or purpleheart coring dowels down to .750 X 15" and slide the core inside the bored front for a nice tight fit. Once this is achieved, we then glue the two together. When the glue is dried, we put a taper on the front of approximately .925/1.150". Each end has a 60 degree center and all pieces are treated with Shaft Dip™. These are incredibly stable and ready for almost immediate use. We recommend letting them sit in your shop for a couple of weeks prior to taking a pass. And yes these are cheap at 3 for $120! |